Baile > Nuacht > Ábhar

Galbhánú vs Sherardizing

Sep 22, 2021

Sherardizing is also called thermal diffusion galvanizing (TDG), vapor galvanizing or  dry galvanizing, and it's is a specific process involving zinc powder and proprietary chemicals. Steel workpieces are cleaned before zinc coating process, and the cleaning process covers degrease and sandblasting, and then they are tumbled in a heated drum at temperatures slightly less than hot-dip galvanizing (680 - 825 degree F) so that matte gray HDG-like intermetallic alloy layers are produced.

Sherardized Rectangular Tubes (2).jpg
Galvanized Angles.jpg

Cé gogalbhánú tumtha te (HDG)is a process of handling steel workpieces to go through a series of pretreatment, and then dipping  steel parts into the molten (830 F) zinc bath with, and workpiece is lowered into the kettle at an angle which allows air to escape from tubular shapes or other corners. During the dipping process, the iron metallurgically reacts with the zinc to form a series of zinc-iron intermetallic layers and an outer layer of pure zinc.



Cad é an difríocht idir sherardizing agus HDG?

Ní chuireann an próiseas galbhánaithe snámh te ina chúis le breabú hidrigine, ach beidh a réamhchóireáil, picilte aigéad ina chúis le breabú. Is gnách go mbíonn dromchla níos gairbhe ag HDG ná mar a bhíonn fiaradh, agus is iondúil go n-úsáidtear an sherardizing le haghaidh páirteanna a éilíonn cosaint láidir in aghaidh creimeadh chomh maith le lamháltas níos déine le haghaidh cóimeála.Páirteanna galbhánaithe snámh tea úsáidtear go forleathan i mbonneagar cosúil le córais ráillí mótarbhealaigh, córas racála cábla i dtollán agus fobhealach, fuinneamh na gréine, struchtúr cruach le haghaidh droichead agus tógála. Úsáidtear sherardizing go forleathan le haghaidh dúntóirí agus oibreacha cruach a éilíonn tionól ardchruinneas, agus níl an cumas táirgthe sherardizing chomh hard le galbhánú tumtha te toisc go bhfuil sé srianta ag an druma tumbling.

Advantages of Sherardizing 

√  No risk of acid deposition around welded area

√  Complete elimination of hydrogen embrittlement

√  No need for re-threading or further fitting operations

√  Readily accepts top coats, no need for expensive primers

√  Withstand a fair measure of high industrial pollution and rough handling

√  Suitable for acting as a pre-coating for paints, powder coatings and rubber bonding

√  Hardest of all zinc coatings compared with hot dip galvanization, spin galvanization and zinc plating

√  Uniform coating, ideal for smaller and irregularly shaped items without unfavorable peak build up on 

    corners or on threads

√  Consists exclusively of intermetallic phase Fe-Zn, which permits the control of case depth and 

    ensures high corrosion resistance

√  Lower temperature process range, which avoids parts losing their mechanical properties and shapes 

    such as spring steels and fasteners

Mar gheall ar an leas a bhaint as sherardizing, tá go leor táirgí cruach a dteastaíonn cóimeáil beachtas chomh maith le cosaint fuaime frith-chreimeadh á sherardized, amhail dúntóirí,lúibíní miotail saincheaptha, struchtúr cruach agus trasnáin cruach.

Míbhuntáiste a bhaineann le Galbhánú Hot Dip

√  Is féidir le píopaí galbhánaithe uisce luaidhe a scaoileadh isteach sa soláthar uisce

√  Rough coating surface, and spikes tend to remain at the end of workpiece during lifting process 

    which ní mór é a bhaint le linn iniúchta

√  Due to the deposition of zinc, undercut nuts is required for fitting purpose, and the heat involved in 

    the galvanization process limits the grade of fastener

√  Due to its rough surface nature, it requires very strict control of sandblasting for uniform 

    galvanization surface.

I mbeagán focal, is é an míbhuntáiste is mó a bhaineann le galbhánú tumtha te ná a dhromchla neamhfhoirmithe a d'fhéadfadh a bheith ina chúis le saincheisteanna cóimeála, go speisialta do dúntóirí. Is é galbhánú tumtha te ceannasachcóireáil dromchla miotaille haghaidhbonneagair, teileachumarsáid, talmhaiocht, dobharshaothrú, Fuinneamh Gréine, mianadóireacht agus tollán.

Chun na fíricí bunúsacha faoi chótaí since éagsúla a shamhlú, is féidir leat tagairt a dhéanamh sa chairt thíos le haghaidh tuiscint níos soiléire ar chostais, ar charachtair sciath agus ar chaighdeáin ábhartha.

Costas

Sherardizing

Zinc   Plating 

Hot Dip   Galvanization

Meánleibhéal

Íseal

Mid   Level

Caighdeáin AE na Breataine

BS   EN IS0 17668:201                        

BS7371 cuid 8:1999

BS1706/BS   EN 12329:2000
BS 3382 CUID 2 le haghaidh dúntóirí

BS   729/BS EN ISO 1461                                               

BS7371 part 6:1988 for fasteners 

Tiús Sciath Sinc

15-80μm or more

5-25μm

30-200μm

Adhesion 

Den scoth, cóimhiotal le tsubstráit

Go dona, gan aon chóimhiotail le foshraith

Go maith, roinnt cóimhiotail le tsubstráit

Aonfhoirmeacht

Excellent, vapour deposition ensures uniformity, ideal for iregularly shaped, recessed and threaded components and tight tolerance for precision assembly. 

Sinc leáite lag ag bailiú suas i bpointe draenála

Droch-shíleáil since ar choirnéil, snáitheanna agus poill

Caith Friotaíocht

Excellent, hardest of the zinc coating due to iron alloy. The coating can only be removed by chemicalor  mechanical solution.

Good, can withstand forming but mainly applied to finished components. 

Maith, sciath docht marthanach ach ní féidir leis seasamh le foirmiú

Iar-Chóireáil Dromchla

Excellent, forms an excellent iron zinc alloy which accepts top coats without the need for primers or surface   preparation. Top coating like paints, powder coatings, Ecoating and rubber bonding is popular choice.

Go dona, éilíonn tuilleadh próiseála chun greamaitheacht a chinntiú

Poor, requires pretreatment like   sandblasting with extra attention to the blasting force, or suitable primer to ensure adhesion

Briseadh Hidrigin

Gan aon riosca, mar ní úsáidtear aon aigéad agus tá an próiseas tirim agus níl aon fhoinsí hidrigine ann.

High risk, due to acid use for pickling process. 

High risk, due to acid use for pickling process. 

Color  

Matte   grey

Popular   colors are yellow/gold, clear/blue, black and green.

Geal agus lonracha, ach laistigh de bhliain, beidh sé aimsir go cuma liath dull aonfhoirmeach

Uaireanta Sprae Salann

Moderate coating thickness could reach 720 hours, and thicker coating could reach 1000   hours. 

Leis an Chomh maith leis na topcoats ar a dtugtar crómáit, agus is é an t-íosmhéid caighdeánach 96 uair an chloig.

For   moderate HDG thickness requirement, it shall pass 480   hours, and for high corrosive enviornment, thicker   coating is required for passing 720 hours.



Glaoigh Linn